ANI METAL is one of the leading plant suppliers in the hot-dip galvanizing industry. In addition to the supply of turnkey galvanizing plants, they provide a number of engineering supports such as process consultancy, cost analysis including market analysis.

The company has completed the installation of nearly 50 turnkey plants and has cooperated with more than 100 companies both in the process consulting and supplies of galvanizing equipment with the world’s leading business partners.

Depending on the customer requirements and investment budgets, ANI METAL supplies galvanizing plants from manual basic systems to environmentally friendly, high-tech modern factories with high-level technology, with semi and full automated material handling.

Atunkimya is one of the leading companies developing hot-dip galvanizing chemicals. The company serves more than 100 galvanizing plants in the market with its premium quality process chemicals, as a result of its R&D department’s continuing efforts. They produce an eco-friendly and sustainable new generation of chemicals for the galvanization process along with process consultancy for optimum results in cost savings and quality improvements.

Bottaro Mario S.r.l. is a family-run company founded in 1956 by Mario Bottaro, specializing in the production of iron wire for packaging presses and for the hot-dip galvanizing process.

The company's business is distinguished by the quality of the selected raw material (only wire rods from the most important steel mills in the world), the investments in research that have led to the development of innovative and certified brand products, fully robotized production plants, the use of clean energy and ecological materials.

Run by the founder's sons, Marco and Alberto Bottaro, today the company is present in 50 countries around the world. Thanks to the superior quality of the products and the range of services offered, it is the reference point in the iron wire sector.

C. H. Evensen Industriovner AS is a Norwegian manufacturer and a global supplier of high-quality equipment, for the Hot Dip Galvanizing Industry.

For nearly 80 years they have been providing innovative “state of the art” solutions to their customers on all continents. The product range covers most types of furnaces, and production lines. Immersion heating, Hot Air Dryers, Fume enclosures, Steel kettle furnaces with gas or electric heating, Ceramic lined top fired furnaces with gas or electric heating for high temperature.

CHE are specialists and have core competence within spin galvanizing, machines for automatic Galvanizing of threaded bolts/ pipes.

Together with partners, able to supply complete turnkey lines.

CHE has more than 4000 installations, in more than 60 countries, worldwide.

EverZinc is a global leader in the production of zinc materials with three product lines: fine zinc powders, zinc oxide and zinc powders for batteries. Industrial operations are located in Belgium, the Netherlands, Norway, China and Malaysia. Over 85.000 tons of recyclable materials are refined from 8 production sites to serve our global customer base.

After more than thirty years activity on hot dip galvanizing lines, GIMECO Impianti Srl is continuously introducing to the market both technological innovations and environmentally clean galvanizing facilities.

With its own experience, enthusiasm and imagination, GIMECO can supply fully equipped or individual components, satisfying very different production requests and helping the customer to achieve high production, high quality standards, improved working conditions for operators and minimise environmental impacts.

GIMECO is always available to evaluate and discuss your ideas: we like your projects to become our projects.

Hasco Thermic Ltd is a wholly-owned subsidiary of B.E Wedge Holdings Ltd, the holding company for leading galvanizing businesses in the UK, Continental Europe and the USA.

Celebrating 50 years in the industry this year, Hasco Thermic has established an enviable reputation for supplying and installing reliable, efficient and durable galvanizing plant across the globe.

Pioneers of the pulse-fired, high-velocity system for furnaces, the most technologically-advanced system available on the market, we now have more than 230 systems in operation around the world.

Hasco Thermic is perfectly placed to offer a flexible approach to meet the needs of its customers.

INGENIA was founded in 2001 by Rudolf Geiersberger as a company focusing on the construction of specialist plants, engineering of modern hot dip galvanizing lines and the design of logistics solutions for production facilities in general. INGENIA’s success is built on the designing of material logistics systems with automated production sequences, a professional team of experienced engineers and the trust of satisfied and long-standing customers.

Innovation, product neutrality, reliability, speed and trust are the key motivators at INGENIA. The company headquarters is in Linz. Sales and service centres are based in Vienna and Moscow. In order to offer its customers even more quality and innovation, INGENIA opened its new Technology Center at Südpark Linz in 2011: 1000 m² of space for administration and engineering and 1400 m² of workshop space for assembly, quality control and R&D.

IMR was established in 1986. Constant innovations and structural changes have thus resulted in the development of today's organisation.

IMR connects the physical metal trade, manufacturing of metal anodes with technical applications and metallurgical consulting. This enables the individual solving of customer requests and requirements. IMR:

• Supplies the industry with non-ferrous metals.
• Produces zinc anodes of various shapes and in highest zinc quality for efficient application in galvanizing equipment.
• Optimises logistic, warehousing, financing as well as monitoring prices for our customers.
• Carries out appraisal and consulting activities on non-ferrous metals using an especially designed experimental laboratory in our plant (metallography, spectral analysis, experimental melting equipment).

IMR's technical and commercial expertise in the application of these non-ferrous metals has consolidated its position as one of the leading-edge companies on the non-ferrous metals market.

Pickling tanks produced by Koerner under the brand name of KVK are exported to over 40 different countries and are in use on every continent.

Koerner's engineers set new standards with the development of the KVK pickling system, a completely encapsulated pickling line which guarantees highly efficient pickling operation with optimum utilisation of the bath temperatures meeting all environmental requirements.

Koerner supplies turnkey galvanizing plants from planning, delivery and installation to commissioning. Koerner galvanizing plants are customer designed solutions and are therefore perfectly matched to our customers' requirements.

Metalsider spa was founded in 1964, and has been operating in the secondary zinc production sector for over 50 years. Metalsider 2 is currently able to recover and recycle up to 20,000 tons of Zinc Ash per year, coming from hot-dip galvanized steel, and 30,000 tons of new and old Zinc scrap.

From the recovery of these waste, Metalsider2 produces Zinc and its alloys which it sells mainly to companies that carry out hot-dip galvanizing of steel or which produce primary alloys of Zinc (Brass).

The name Rezinal originates from the abbreviation of its manufacturing purpose: Recycling, Zinc metal and Alloys.

Rezinal is the trendsetter in sustainable recycling; it transforms zinc ashes (zinc skimmings) from hot-dip galvanisers, zinc scrap and other zinc-containing materials into high-quality secondary zinc.

Rezinal has its industrial operations in Zolder, Belgium and serves a global worldwide customer base.

It focuses on applications where expertise in zinc materials metallurgy make a difference, as such serving the hot-dip galvanising industry and brass manufacturers, as well as zinc oxide and zinc dust producers.

Today, with an infinite capacity, Rezinal is Europe's largest secondary zinc producer and one of the leading producers in the world.

For over 20 years, Scheffer Krantechnik GmbH, Germany, has been developing state-of-the-art crane and transport systems for the hot dip galvanizing industry, ranging from the upgrading of existing equipment to complete customized plant systems. Since then, we are proud to have installed more than 50 galvanizing plants and counting, with our footprint in more than 25 countries across 5 continents.

With more than 175 employees in our team, we are committed to provide the best services- from design and planning, construction and assembly, to comprehensive after-sales support or even the service as a general contractor for delivering the complete galvanizing system. Our expertise also extends to training, inspection and maintenance for the galvanizing industry.

Here at Scheffer Krantechnik, we believe in continually setting new standards for transport systems in all aspects of safety and productivity, pushing boundaries in software innovation and maximizing efficiency. This is why our company has established itself as the global market leader for transport technology in the hot-dip galvanizing industry.

Western Technologies was born of the idea that the galvanizers needed practical solutions to the challenges of the industry. The top management of the company combines extensive experience and expertise in fields of plant design and engineering, plant operations and management, and process chemistry and metallurgy.

Western Technologies is dedicated to the design and manufacture of high quality, durable, and energy-efficient equipment for the after-fabrication hot dip galvanizing industry. Westech is a one-source supplier of engineering, plant design and equipment to the hot dip galvanizing industry.

Supplier of zinc pumps, crucibles, tanks and kettles for general, wire, strip and tube hot dip galvanizing operations and for metal melting and refining installations.

Long experience in zinc pumping services with or without holding furnaces and kettle wall thickness tests of in-situ kettles.